• KEW8031F is designed to check phase sequence.
Lamps provided on the unit will also tell you if a phase is open.
• Can check a wide range of 3-phase power source from 100V to....

• Digital Illuminometer
• Model 5201 is a highly portable and compact digital illuminometer for measuring illuminance from 0.1 to 19, 990 Lux, with auto range switching.
• The....

• Water and dust proof construction. The instrument is protected against water and dust.
• True RMS for accurate measurement of non-sinusoidal waveform current.
• Selectable....

• Designed to meet international safety standards
IEC 61243-3/ IEC 61010-1
Measurement Category ( CAT.) IV 600V
• Self-Diagnostic test
• AC and DC voltage tests up to 690V....

High Accuracy, High Performance and Reliable Measurements :

• 0.09% basic DC accuracy
• Large display with 6, 000 counts
• True-RMS Measurements
• True-RMS or MEAN value....

• AC CLAMP ADAPTOR
• Model 8006 is designed to measure AC current up to1500A.
• It can accommodate up to 60mm-dia conductor or 50mm by 75mm bus-bar.

Measuring Range : 1500A....

• AC CLAMP ADAPTOR
• Model 8112 clamp adaptor is designed to be an AC current/ voltage conversion probe capable of measuring AC current from 0.1mA to 120A in conjunction with....

• Equipped to measure both AC and DC current with transformer jaws of large diameter.
• Can measure AC and DC currents up to 2000A.
• Output terminal for connection to recorders....

High Accuracy, High Performance and Reliable Measurements :

• 0.02% basic DC accuracy
• Large display with 50, 000 counts
• Dual display for double indication for AC and DC, ....

True RMS can measure and indicate distorted waveforms
• 6040 counts with Bar Graph display
• MIN/ MAX function enables to record min & max value
• REL( relative value) function....

• Digital Light Meter
• 3 ranges changeable from low to high illuminance. ( 200/ 2000/ 20000lux)
• Data hold function.
• Digital light meter with separate light receiving....

• Simple temperature measurement from -40º C to 500º C
• Laser sight pinpoints measured spots.
• Palm size, lightweight 180g only.
• Automatic power off for saving battery life....

• Waterproof handheld Infrared Thermometer
• Safe even if getting wet.
Dustproof and waterproof structure of IP67.
• Possible to wash
• Please feel secure to use the product....

• Digital Phase Indicator with open phase checker
• Phase indicator designed to check the presence of open phase and also the phase sequence by LED and buzzer at the same time.
....

• AC CLAMP ADAPTOR
Model 8112BNC is an AC clamp adaptor designed for use with oscilloscopes. Output cord has a BNC connector which enables direct observation of current waveform....

• AC/ DC CLAMP ADAPTOR
• Model 8113 is a clamp-on AC/ DC current/ voltage converter that permits AC/ DC current measurements from 1mA to 200A in conjunction with a voltmeter....

• Flexible for various test fields
• Can measure AC current up to 3000A
• Flexible and light weight by the air core coil used at the sensor part
• Measurable conductor size:
....

Applicable model : 5010/ 5020
Conductor size : ¦ 24
Rated current : AC 100A
Output voltage : AC 500mV/ 100A ( AC 5mV/ A)
Accuracy : ± 2.0% rdg± 0.3mV ( 50/ 60Hz)
± 3.0% rdg....

Applicable model : 5010/ 5020
Conductor size : ¦ 40
Rated current AC : 500A
Output voltage : AC 500mV/ 500A ( AC 1mV/ A)
Accuracy : ± 2.0% rdg± 0.3mV ( 50/ 60Hz)
| ± 3.0% ....

Clamp your instrument around the pick-up coil of the multitran.
Then, clamp the transformer jaws of the multi-tran on the conductor, as shown below.
Multiply the reading of your....