RIG Icom IC-706MKIIG HF/ VHF/ UHF All Mode Transceiver

RIG Icom IC-706MKIIG HF/ VHF/ UHF All Mode Transceiver

Specifications
General
Frequency range
Receive
Transmit
0.030 - 199.999 MHz* 400 - 470 MHz*
1.8 - 1.999 MHz* 3.5 - 3.999 MHz*
7.0 - 7.300 MH* 10.1 - 10.150 MHz
14.0 - 14.350 MHz 18.068 - 18.168 MHz
21.0 - 21.450 MHz 24.89 - 24.990 MHz
28.0 - 29.700 MHz 50.0 - 54.000 MHz*
144.0 - 148.000 MHz* 430.0 - 450.000 MHz*
* Varies according to version
Mode USB, LSB, CW, RTTY ( FSK) , AM, FM, WFM ( Rx only)
No. of Memory Channels 107 ( 99 regular, 6 scan edges, 2 call channels)
Antenna Connector SO-239x2 ( for HF/ 50 MHz and 144/ 430 MHz) / 50©
Frequency stability Less than ± 7ppm from 1 min. to 60 min. after power ON. After that rate of stability less than ± 1 ppm/ hr. at + 25 ° C ( + 77° F) . Temperature fluctuations 0° C to + 50° C ( + 32° F to + 122° F) less than ± 5 ppm.
Current Drain
Tx Max 20 A
Rx Standby 1.8A
Max Audio 2.0 A
Temperature Range -10° C to 60° C;
14° F to 140° F
Dimensions
( projections not included) 167( W) X 58( H) X 200( D) mm;
69/ 16( W) X 29/ 32( H) X 77/ 8( D) in
Weight ( approx.) 2.45 kg ( 5 lb 6 oz)
CI-V connector 2 conductor, 3.5 ( d) mm ( 1/ 8" )
ACC Connector 13 pin
Transmitter
Output Power
SSB/ CW/ RTTY/ FM AM
HF/ 50 MHz 5 - 100 W 2 - 40 W
144 MHz 2.5 - 50 W 2 - 20 W
440 MHz 2 - 20 W 2 - 8 W

Modulation System

SSB

AM

FM

Balanced modulation

Low level modulation

Variable reactance modulation

Spurious Emissions

Below 47.5MHz

47.5-50MHz

Above 50MHz

Less than -60 dB

-50 to -60 dB

-60 dB
Carrier Suppression More than 40 dB
Unwanted Sideband More than 50 dB
MIC Connector 8 pin modular jack ( 600© )
KEY connector 3-conductor 6.35 ( d) mm ( 1D43)
RTTY connector 3-conductor 3.5 ( d) mm ( 1D83)
Receiver

Receiving system

SSB/ CW/ AM/ WFM

FM

Double superheterodyne

Triple superheterodyne
Intermediate frequencies ( Unit: MHZ)
1st 2nd 3rd
SSB/ AM-N/ FM 69.0115 9.0115 0.455*
CW 69.0106 9.0106 —
RTTY 69.0105 9.0105 —
AM/ FM-N 69.0100 9.0100 0.455*
WFM 70.7000 10.7000 —
* FM only
Receive sensitivity ( preamp on; except 4-4.5 and 8-9 MHz)
SSB/ CW
10 dB S/ N AM
10 dB S/ N FM
12 dB SINAD WFM
12 dB SINAD
0.5-1.8 MHz - 13µ V - -
1.8-28 MHz 0.15µ V 2.0µ V 0.5µ V -
28.0 - 29.7 0.15µ V 2.0µ V 0.5µ V -
50.0MHz band 0.12µ V 1.0µ V 0.25µ V -
76-108MHz - - - 10.0µ V
144/ 440 MHz band 0.11µ V 1.0µ V 0.18µ V -

Squelch Sensitivity ( threshold)

SSB

FM

Less than 5.6 µ V

Less than 0.3 µ V

Selectivity ( normal)

SSB, CW, RTTY

AM/ FM-N

FM

More than 2.4 kHz/ - 6 dB

Less than 4.8 kHz/ -60 dB

More than 8.0 kHz/ -6 dB

Less than 30 kHz/ -36 dB

More than 12 kHz/ -6 dB

Less than 30 kHz/ -60 dB
Spurious and Image Rejection
HF bands
50 MHz
144/ 430( 440) MHz

More than 70 dB
More than 65 dB ( except IF through)
More than 65 dB
Audio output power More than 2.0 W ( at 13.8 V DC)
RIT Variable Range ± 9.99 kHz
PHONES connector 3-conductor, 3.5 ( d) mm ( 1D83) / 8©
External SP Connector 2-conductor, 3.5 ( d) mm ( 1D83) / 8©

The IC-706MKIIG meets MIL-STD requirements and strict environmental standards for shock ( MIL 810C, D, E) and vibration ( MIL 810C, D, E) .

All stated specifications are subject to change without notice or obligation.
Supplied Accessories

* Hand Microphone
* RTTY Key Plug
* DC Power Cable
* Electronic Keyer Plug
* Spare Fuses
* ACC Cable