Blast Room / pengerjaan sand blasting room

We offer a selection of blast rooms designed and built for specific applications. Our combination blast and paint facility provides a controlled environment in which blast cleaning and painting can be carried out.
When selecting and designed a blast room several variable must be considered including : work piece type, dimensions, weight , condition, blasting finish requirements, blasting purpose, type of abrasive to be used, and production throughput requirements etc. Careful consideration of these requirements will permit the selection of the correct blast room.
If you wish to view one of our blast rooms, or require further information, please feel free to contact us.

Why Blast Room

There are several advantages of installing a blast chamber, both economical and environmental.

* Weather constraints are no longer a problem. You can blast 24 hours per day, 365 days a year allowing you to achieve higher productivity and meet customer' s deadlines.
* The controlled environment assists your blaster to achieve a consistent quality of work, reducing rework.

Typically Blast Room will incorporate an automatic abrasive recycling system which allows the use of recyclable abrasive, reducing your costs drastically. Not only do you reduce purchase costs of abrasive, you also reduce handling and disposal costs
By containing all your dust from your blasting operation, your general site environment is cleaner and tidier and your neighbors are happier too.

Features of Blast Room

1. The chamber itself includes ceiling lights, rugged doors and it is normally lined with corrugated galvanized or rubber sheet internally to resist the act of abrasion. The room must also have correctly sized air entry and exit plenums for efficient ventilation without allowing abrasive to escape
2. The dust collection and ventilation system provides sufficient airflow in the blast room to keep dust level low, increase operation visibility and to quickly clear the dust from the room when blasting ceases.
3. An abrasive recovery system conveys the spent abrasive to a central point for cleaning and recycling.
4. The abrasive recycling and cleaning unit clean the used abrasive by separating dust load, paint flakes and contaminant from the good and reusable abrasive.The processed abrasive is then stored in a silo and to be used again.
5. Blast pots, hoses and nozzles are selected to suit the blast room function. Typically multiple outlets are installed ti allow more than one operator to blast continuously.
6. Dehumidifier is designed to control the Relative Humidity within blast room by prolonging the rate of oxidation while providing continual operation

Please contact our technical sales for more product information.